ADLINK Technology PCI-8174 Uživatelský manuál stáhnout pdf (Strana 4)

Motion Control Products

Pulse Train

Pulse train motion cards generate high-frequency digital signals

to control servo motors and steppers, matching the performance

and precise position of high-performance servo amplifiers.

SSCNET III

SSCNET is a serial connection protocol proposed by Mitsubishi.

The SSCNET III protocol has real-time response and absolute

synchronization. With this technology, a single board can

connect to up to 16 axes. The cycle time is 0.444ms.

SSCNET ll

SSCNET is a serial connection protocol proposed by Mitsubishi.

The SSCNET II protocol has real-time response and absolute

synchronization. With this technology, a single board can

connect to up to 12 axes. The cycle time is 0.888ms.

PTP Motion

Move one axis from position A to position B (Point-to-point

motion).

Linear Interpolation

Move two or multiple coordinated axes to perform line piece

motion.

Circular Interpolation

Move two coordinated axes to perform arc and circular piece

motion.

T-Curve/S-Curve Velocity Profile

Users can use T-curve or S-curve for speed profiles. S-curve

velocity typically has smoother performance.

Change Speed On-the-fly

Change the rotation speed on-the-fly while the axis is running.

DSP

DSP, or Digital Signal Processing, allows for time-critical

motion control, multiple axes synchronization, and standalone

control in a variety of applications.

Contouring

Some motion controllers can provide hardware-based contouring

control in order to provide a variety of trajectories controls for

smooth motion.

Card ID

Card identification to support multiple cards in one system.

Manual Pulser Input Interface

Some motion control solutions provide the interface that connects

manual pulser input devices, which can be used to move the

axis.

Position Compare & Trigger Output (TRO)

By sending several position compare points to the buffer with

this feature, the digital signal would be triggered upon reaching

each compare position. The high frequency trigger pulse can

signal line scan frame grabbers.

Closed-Loop Control

Motion control cards can accept feedback signals to perform

closed-loop control. Users can tune the control loop gain to

get the better positioning or velocity control.

Absolute Synchronization

Most of the time a pulse train type motion control solution

does not provide this feature. However, SSCNet motion

controllers entitle users to enjoy this feature, which is especially

vital for complicated motion patterns requiring absolute

synchronization of multiple axes.

Digital I/O Capacities

Digital input and output channels are provided for users.

Analog Output Channel

Some products offer analog output channels for voltage signal.

Analog Input

Some boards offer analog input channels for voltage signals.

HSL

HSL is a High Speed Link bus designed specifically for distributed

real-time I/O control and motion systems.

Emergency Input

Emergency Input is typically used to immediately stop a moving

stage when an emergency occurs. This is typically implemented

by an external button to open the circuit and stop the controller

from sending commands to servo/stepper motors

Security

This function offers hardware security protection for software

developed by the system integrator.

ADLINK offers a powerful, cost-effective, and easy-to-use motion control solution for customers with a platform ready for many industrial

applications, such as semiconductor/LCD equipment manufacturers, electrical assembly manufacturers, or packaging applications. Machine

manufacturers will benefit from precise positioning and advanced motion control technology.

ADLINK PC-based motion control solutions provide; including pulse train, DSP-based analog, and the SSCNET (Servo System Control Network)

series. Our motion control solutions deliver accurate and high performance motion for target objects. Our position comparing and trigger output

capabilities match the performance of high-end frame grabbers in carrying out on-the-fly image inspection or line scanning. Distributed motion

control solutions are also available. ADLINK motion control solutions provide user-friendly and ready-to-use function library for use under DOS,

Windows®, and Linux. Our superior technical support team is always ready to assist you.

Feature Overview

Develop System

• MotionCreatorPro

inside

• Motion parameter assignment for testing

• Debug the system

Run Time Software Support

• Single Axis Motion

• Linear/Circular Interpolated Motion

• Position Compare & Trigger Output

• Sync. Operation, etc.

Hardware Platform

• Pulse Train Type

• DSP-based Analog Type

• SSCNET Series

• Multi-channel Encoder Board

• CompactPCI Solution

• PXI Solution

Sync

DI/O

TRO

Closed loop

Pulser

T-Curve

S-Curve

HSL

Support

Pulse

Line

Speed Change

ARC

PTP

DSP

inside

M M

SSCNET II

M M

SSCNET III

Contouring

Card ID

Security

STOP

Emergency

Input

CompactPCI

system &

Industrial

Computers

Software

DPAC

Motion

Control

Vision

Industrial

Communication

NuDAM

GEME

Series

HSL

4-4

www.adlinktech.com

1 2 3 4 5 6 7 8 9 ... 35 36

Komentáře k této Příručce

Žádné komentáře

ADLINK Technology PCI-8174 Uživatelský manuál Strana 4

Komentáře k této Příručce

Související produkty a manuály pro Digitální a analogové I / O moduly ADLINK Technology PCI-8174